iRacing kormány beállítás

iRacers.hu és a VSR.hu közös bajnoksága. A részvétel teljesen ingyenes, akinek nincs iRacing accountja, tudunk adni 3 hónapos ingyenes kipróbálási lehetőséget, amivel tudtok indulni a bajnokságban.

Moderátor: BT Tag

DzSiBi
VSR Szervertag 2017
Hozzászólások: 307
Csatlakozott: 2014.05.17. 12:10

iRacing kormány beállítás

HozzászólásSzerző: DzSiBi » 2015.11.23. 14:52

Sziasztok!

Mivel többen is belefutottak, nyitottam egy ilyen topicot.

Első körben az újoncok ezt a videót nézzék meg:

https://www.youtube.com/watch?v=rNcHODxX6zk



A lényeg röviden!
Mind a kormány profilerében mind a játékban a maximális fokot használjátok, ez G25 és DFGT esetében 900

Itt egy angol nyelvű leírás, nézzétek át, ha valami nem tiszta akkor kérdezzetek nyugodtan ;-)
Hampus Andersson, post: 1151472, member: 554 írta:This is a c/p from iRacing not written by me, posted here for convenience to you guys.
-
By Julien Apruzzese. Short note: David Tucker is the man working on the FFB for iRacing.

Hi friends,

instead of keeping on posting in each thread, i decided to write this short post in order to give to the community the optimal FFB settings.
These setting are not based on feeling, but on scientist approach developped by David Tucker.
The driver settings are supposed not to be changed since the goal is to play only with the in sim sliders.
For the driver settings, the goal is to achieve the best linearity.
You can find the sources here : http://members.iracing.com/jforum/posts ... 73510.page
____________________________________________________________________________

For Logitech driver.

Overall Effects Strength : 106%.
Spring Effect Strength : 0%.
Damper Effect Strength : 100%.
Centering Spring : unchecked.
Report Combined Pedals : unchecked.
Rotation : 900°.
Allow Game To Adjust : checked.
____________________________________________________________________________

For Fanatec driver.

Autocenter Spring : unchecked.
Wheel Angle : 900°.
Dampening Strength : 100%.
Combined Pedals : unchecked.

In the wheel tuning menu.
SEN : OFF.
FF : 100.
Sho : 100.
dri : OFF or 1.
Everything else : 0 or OFF.
____________________________________________________________________________

For TR500 driver.

Rotation : 900°.
Master : 56%.
Constant : 100%.
Periodic : 100%.
Spring : 100%.
Damper : 100%.
Auto-centering spring : by the game.
____________________________________________________________________________

Damping in sim.

From 0 to 20% (you can start at 75%, since it was the value hard coded before the release, and go down 5% by 5% day after day, since damping masks FFB details).
It is recommended to set it at 0.

FFB in sim.

The value needs not to go up a maximal value that you can find using this method following :
http://members.iracing.com/jforum/posts ... 88137.page
So you can adjust the slider between 0 and this found maximal value in order to match the different torques from the different wheels.
This maximal value is not dependent on the wheel ! It's dependent on the car, the setup and the track.


It is strongly recommended to recalibrate the wheel and to redo it each new build.
Take time to calibrate it slowly and when iRacing ask you to put your wheel at center or at 90°, take time to show to the simulation the exact center or 90° of your real wheel, not what you see on your screen !
Moreover this build seems very sensitive to the steadiness of our PC and i can stop to hardly recommend you to make a total format of your PC to welcome 2.0.
____________________________________________________________________________

Here is some examples of the FFB in sim maximal value.

Cadillac at Motegi.

FFB iRacing maximal value : 8.0
So adjust the FFB for your personnal preference between 0.1 and 8.0.

Kép


MX5 Cup at Suzuka.

FFB iRacing maximal value : 16.0
So adjust the FFB for your personnal preference between 0.1 and 16.0.

Kép


Up to you then to play between 0 and these maximal value in order to match the different torque of each wheel. The G25/27 being the wheel with the weakest motors, in certain situations, it can happen that the wheel don't developp enough torque. We can't do nothing since it's the technical limitation of our wheel today. So you have 2 choices (always by respecting the driver settings written on the first post : either taking the choice to saturate a little the FFB in order to find again a little more torque on the FFB details, or add a little damping between 0 and 20% in order to add weight to the wheel but you will mask a little the details of the FFB.

Let's go racing :D
Kép

#5 Gabor Viski | George Racing Team(link)
//////NASCAR Everything else is just a game...
iRacing.com The World's Best Motorsport Simulation
VSR.hu Itt a legjobbakkal versenyezhetsz!
iR MyRacingAPP

Vissza: “Rookie Bajnokság 2015/16”

Ki van itt

Jelenlévő fórumozók: nincs regisztrált felhasználó valamint 1 vendég